1. Multi-axis control and multi-axis linkage: The commonly used machining centers are mostly three-axis linkage. By increasing the swing angle and increasing the rotation coordinates, four-axis linkage, five-axis linkage, seven-axis linkage, and even more axis linkage can be formed. center.
2. Parallel machine tools: The functions of common machining centers are relatively fixed. Vertical machining centers, horizontal machining centers, or machining centers, turning centers, etc. are combined to form a processing system, which increases the processing range and processing capacity of the machine tool.
3. Tool damage alarm: use infrared, acoustic emission, laser and other detection methods to detect the tool. Find tool wear, damage, etc., timely alarm, automatic compensation or replacement of spare tools to ensure product quality.
4. Tool life management: Unified management of multiple blades on a tool, or several tools working at the same time, to improve processing efficiency.
5. Automatic protection of machine tool overload: The machine tool can automatically protect the machine tool according to the size of the load during processing. When the load exceeds the maximum load set by the machine tool, the machine tool will automatically shut down. The load size can be set and changed by yourself.
6. Processing dynamic entity simulation: During the processing process, the processing state of some parts in the machine tool is not easy to observe. If the dynamic entity simulation function is added, the processing state of the workpiece can be observed at any time, so as to prevent undesirable phenomena in processing, such as Knife, overcut, not only, unreasonable steps, etc.
7. On-line detection of workpiece: also known as real-time detection, which is to detect the workpiece in real time in the process of processing, and find and correct errors in time. This function can effectively avoid the problem of re-clamping and positioning caused by unqualified inspection after processing, shorten the production time and improve the production efficiency.
8. Adaptive control: The machine tool with this function can change the cutting conditions (such as cutting force, temperature, etc.) sensed in the processing process, and control the machine tool to change the cutting amount in time through the adaptive control system, so that the machine tool and the tool are always Maintain the best condition, so as to obtain high cutting efficiency and machining quality, and prolong the service life of the tool.